How to install a Lan enterprise license on Cisco Nexus N3K-C3548P-10G

How to install a Lan enterprise license on Cisco Nexus N3K-C3548P-10G

*Step 1

Press Enter at anytime to skip a dialog. Use ctrl-c at anytime
to skip the remaining dialogs.

Would you like to enter the basic configuration dialog (yes/no): yes

Create another login account (yes/no) [n]: n

Configure read-only SNMP community string (yes/no) [n]: n

Configure read-write SNMP community string (yes/no) [n]: n

Enter the switch name : switch1

Continue with Out-of-band (mgmt0) management configuration? (yes/no) [y]: y

Mgmt0 IPv4 address : 192.168.0.216

Mgmt0 IPv4 netmask : 255.255.255.0

Configure the default gateway? (yes/no) [y]: y

IPv4 address of the default gateway : 192.168.0.1

Enable the telnet service? (yes/no) [n]: n

Enable the ssh service? (yes/no) [y]: n

Configure the ntp server? (yes/no) [n]: n

Configure default interface layer (L3/L2) [L2]: l2

Configure default switchport interface state (shut/noshut) [noshut]: noshut

Configure CoPP System Policy Profile ( default / l2 / l3 ) [default]: default

The following configuration will be applied:
switchname switch1
interface mgmt0
ip address 192.168.0.216 255.255.255.0
no shutdown
exit
vrf context management
ip route 0.0.0.0/0 192.168.0.1
exit
no telnet server enable
no ssh server enable
system default switchport
no system default switchport shutdown
policy-map type control-plane copp-system-policy ( default )

Would you like to edit the configuration? (yes/no) [n]: n

Use this configuration and save it? (yes/no) [y]: y

[########################################] 100%
Copy complete, now saving to disk (please wait)...

**Step 2

User Access Verification
switch1 login: admin
Password: **********
Cisco Nexus Operating System (NX-OS) Software

switch1# show mod
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ---------------------- -----------
-
1 48 48x10GE Supervisor N3K-C3548P-10G-SUP active *

Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ ---------------------------------------------------
-
1 6.0(2)A1(1d) 1.2 --

Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 f44e.05b3.4628 to f44e.05b3.4667 FOC18475Q8K

Copy the license file from USB1:

*** Step 3 copy the license file from USB1 to Bootflash:

switch1# copy usb1:N3K1812040623_FOC1846R24A.lic bootflash:
Copy progress 100% 331B
Copy complete, now saving to disk (please wait)...
switch1# dir
0 Jan 01 17:11:51 2011 20110101_171151_poap_3771_init.log
0 Jan 12 17:36:57 2015 20150112_173657_poap_3681_init.log
168 Nov 30 19:59:25 2018 20181130_195805_poap_3673_init.log
168 Dec 04 18:18:06 2018 20181204_175955_poap_3673_init.log
331 Dec 04 18:48:55 2018 N3K1812040623_FOC1846R24A.lic
635 Jan 12 17:14:03 2015 license_FOC1846R24A_7_1.lic
4096 Jan 12 17:28:25 2015 lost+found/
31868416 Jan 12 17:06:22 2015 n3500-uk9-kickstart.6.0.2.A1.1d.bin
232250664 Jan 12 17:07:02 2015 n3500-uk9.6.0.2.A1.1d.bin
4096 Jan 01 17:10:54 2011 vdc_2/
4096 Jan 01 17:10:54 2011 vdc_3/
4096 Jan 01 17:10:54 2011 vdc_4/

Usage for bootflash://
394297344 bytes used
1500872704 bytes free
1895170048 bytes total

Installing the license file.

**** Step 4 installing the license

switch1# install license bootflash:N3K1812040623_FOC1846R24A.lic
Installing license .......done

***** Step 5 Verifying the license feature.

switch1# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
24P_LIC_PKG No - Unused -
24P_UPG_PKG No - Unused -
LAN_BASE_SERVICES_PKG Yes - Unused Never -
ALGO_BOOST_SERVICES_PKG Yes - Unused Never -
LAN1K9_ENT_SERVICES_PKG No - Unused -
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused Never -
--------------------------------------------------------------------------------
switch1# ^C
switch1# wr erase
Warning: This command will erase the startup-configuration.
Do you wish to proceed anyway? (y/n) [n] y

Thanks Suggestions always welcome.

SvNetworks