CISCO

How to Upgrade IOS version on Cisco WS-C4948E using a basic vlan configuration.
From version:
cat4500e-ipbasek9-mz.122-54.SG.bin to
cat4500e-entservicesk9-mz.152-4.E7.bin

**Using basic Vlan configuration ( vlan 1)

Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int vlan 1
Switch(config-if)#ip add 192.168.0.149 255.255.255.0
Switch(config-if)#no shut

**Assing intefaces to vlan 1
Switch(config-if)#int ran gi1/1 - 10
Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 1
Switch(config-if-range)#no shut

**Checking space available in bootflash:

Switch#dir
Directory of bootflash:/

6 -rw- 23126857 Dec 19 2011 07:57:00 +00:00 cat4500e-lanbase-mz.122-54.SG1.bin
7 -rw- 24936345 Jun 27 2012 08:29:42 +00:00 cat4500e-ipbasek9-mz.122-54.SG.bin
8 -rw- 33767872 May 24 2014 10:23:38 +00:00 cat4500e-ipbasek9-mz.151-2.SG3.bin

128282624 bytes total (36892672 bytes free)

**Deleting files.

Switch#del /f /r cat4500e-lanbase-mz.122-54.SG1.bin
Switch#
Switch#del /f /r cat4500e-ipbasek9-mz.122-54.SG.bin

**Checking connectivity to TFTP server

Switch#
Switch#ping 192.168.0.93

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.93, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Switch#

Switch#copy tftp bootflash:
Address or name of remote host []? 192.168.0.93
Source filename []? cat4500e-entservicesk9-mz.152-4.E7.bin
Destination filename [cat4500e-entservicesk9-mz.152-4.E7.bin]?
Accessing tftp://192.168.0.93/cat4500e-entservicesk9-mz.152-4.E7.bin...
Loading cat4500e-entservicesk9-mz.152-4.E7.bin from 192.168.0.93 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 41594002 bytes]

41594002 bytes copied in 143.369 secs (290119 bytes/sec)
Switch#

Switch#dir
Directory of bootflash:/

23 -rw- 41594002 Jan 24 2019 13:36:16 +00:00 cat4500e-entservicesk9-mz.152-4.E7.bin

128282624 bytes total (77135872 bytes free)

Switch#reload
Proceed with reload? [confirm]

Switch#show ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.2(4)E7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 18-Sep-18 13:49 by prod_rel_team

ROM: 12.2(44r)SG11
Switch uptime is 25 minutes
System returned to ROM by reload
System restarted at 21:36:42 UTC Thu Jan 24 2019
System image file is "bootflash:cat4500e-entservicesk9-mz.152-4.E7.bin"
Hobgoblin Revision 21, Fortooine Revision 1.40

Last reload reason: Unknown reason

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C4948E (MPC8548) processor (revision 5) with 1048576K bytes of memory.
Processor board ID CAT1549S1C2
MPC8548 CPU at 1GHz, Cisco Catalyst 4948E
Last reset from Reload
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

Switch#
Switch#show inv
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4948E 1 slot switch "
PID: , VID: , SN: CAT1549S1C2

NAME: "Supervisor(slot 1)", DESCR: "10/100/1000BaseT (RJ45), 10GE (SFP+) Supervisor with 48 10/100/1000BASET ports and 4 10GE SFP+ port"
PID: WS-C4948E , VID: V05 , SN: CAT1549S1C2

NAME: "Power Supply 1", DESCR: "Power Supply ( AC 300W )"
PID: PWR-C49E-300AC-R , VID: , SN: PAC15314L7Z

NAME: "Power Supply 2", DESCR: "Power Supply ( AC 300W )"
PID: PWR-C49E-300AC-R , VID: , SN: PAC15314L0E

Switch#show mod
Chassis Type : WS-C4948E

Power consumed by backplane : 0 Watts

Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 52 4948E 10/100/1000 (RJ45) 10GE (SFP+) WS-C4948E CAT1549S1C2

M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 2894.0fd7.2380 to 2894.0fd7.23b3 2.0 12.2(44r)SG1 15.2(4)E7 Ok

System Failures:
----------------
Power Supply: bad/off (see 'show power')

SSwitch#show env
no temperature alarms

Module Sensor Temperature Status
------+--------------------------+--------------------+------------
1 air inlet 21C (49C,64C,67C) ok
1 air outlet 36C (69C,85C,88C) ok

Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C49E-300AC-R AC 300W good good n.a.
PS2 PWR-C49E-300AC-R AC 300W good good n.a.

Power supplies needed by system : 1
Power supplies currently available : 2

Chassis Type : WS-C4948E

Power consumed by backplane : 0 Watts

Switch Bandwidth Utilization : 0%

Supervisor Led Color : Green

Module 1 Status Led Color : Green

Fantray : Good
Fantray removal timeout : 120

Power consumed by Fantray : 30 Watts

Switch#

Thanks

SvNetworks