Juniper MPC4E 3D 32XGE fpc0 CMIC 0 3 is running out-of-date firmware version 2.52

Juniper MPC4E 3D 32XGE fpc0 CMIC 0 3 is running out-of-date firmware version 2.52

system log message:
Mar date fpc0 CMIC(0/3): number cmic-vsc8248-0/0/7 is running
> out-of-date firmware version 2.52 (0x234). Please upgrade firmware to
> version 2.53 (0x235) or later.

root> show chassis hardware detail
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN11FE3*** MX240
Midplane REV 07 760-021404 ACAB8=*** MX240 Backplane
FPM Board REV 04 760-021392 ABCA2*** Front Panel Display
PEM 0 Rev 10 740-029970 QCS132***** PS 1.4-2.52kW; 90-264V AC in
PEM 1 Rev 10 740-029970 QCS132***** PS 1.4-2.52kW; 90-264V AC in
Routing Engine 0 REV 08 740-031116 900915**** RE-S-1800x4
CB 0 REV 14 750-031391 CAAG9*** Enhanced MX SCB
FPC 2 REV 25 750-037358 CABY**** MPC4E 3D 32XGE
CPU REV 08 711-035209 CABT**** HMPC PMB 2G
PIC 0 BUILTIN BUILTIN 8X10GE SFPP
PIC 1 BUILTIN BUILTIN 8X10GE SFPP
PIC 2 BUILTIN BUILTIN 8X10GE SFPP
PIC 3 BUILTIN BUILTIN 8X10GE SFPP
Fan Tray 0 REV 01 710-030216 ZD2839 Enhanced Fan Tray

root> show system firmware (hiddden commnad) my MX240 chassis was running Junos version 13.3R1.8
Part Type Tag Current Available Status
version version
FPC 2 ROM Monitor 0 0 10.4.1 OK
PIC 0 CMIC 2/0 EEPRO 0 ?? OK
PIC 0 CMIC 2/0 EEPRO 1 ?? OK
PIC 0 CMIC 2/0 EEPRO 2 ?? OK
PIC 0 CMIC 2/0 EEPRO 3 ?? OK
PIC 0 CMIC 2/0 EEPRO 4 ?? OK
Routing Engine 0 RE BIOS 0 1.1 OK

as per my output the junos version 13.3R1.8 does not give me specific information about firmware.

the only solition was upgrade the junos to a later release

root> show system firmware
Part Type Tag Current Available Status
version version
FPC 1 ROM Monitor 0 0 10.0.39 OK
FPC 2 ROM Monitor 0 0 10.4.1 OK
PIC 0 CMIC 2/0 EEPRO 0 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 1 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 2 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 3 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 4 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 5 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 6 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 7 2.52 2.53 OK
Routing Engine 0 RE BIOS 0 1.1 OK

Upgrading the firmware.

root> request system firmware upgrade pic fpc-slot 2 pic-slot 0
Part Type Tag Current Available Status
version version
FPC 2
PIC 0 CMIC 2/0 EEPRO 0 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 1 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 2 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 3 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 4 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 5 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 6 2.52 2.53 OK
PIC 0 CMIC 2/0 EEPRO 7 2.52 2.53 OK
Perform indicated firmware upgrade ? [yes,no] (no) yes

Firmware upgrade initiated.

root> show system firmware
Part Type Tag Current Available Status
version version
FPC 1 ROM Monitor 0 0 10.0.39 OK
FPC 2 ROM Monitor 0 0 10.4.1 OK
PIC 0 CMIC 2/0 EEPRO 0 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 1 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 2 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 3 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 4 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 5 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 6 2.52 2.53 UPGRADED SUCCESSFULLY
PIC 0 CMIC 2/0 EEPRO 7 2.52 2.53 UPGRADED SUCCESSFULLY
Routing Engine 0 RE BIOS 0 1.1 OK

root> show chassis fpc
Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
0 Empty
1 Ready 29 0 0 16 17 15 0 0 0
2 Ready 28 0 0 15 20 22 0 0 0

root> request chassis mic fpc-slot 2 mic-slot 0 offline
FPC slot 2 does not support this command

root> request chassis mic fpc-slot 2 mic-slot 1 offline
FPC slot 2 does not support

root> request chassis fpc slot 2 offline
Offline initiated, use "show chassis fpc" to verify

root> request chassis fpc slot 1 offline
Offline initiated, use "show chassis fpc" to verify

*****In order to verified the status of the FPC

root> show chassis fpc
Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
0 Empty
1 Offline ---Offlined by cli command---
2 Offline ---Offlined by cli command---

root> show chassis firmware
Part Type Version
FPC 1 ROM Juniper ROM Monitor Version 10.0b39
O/S Version 17.2R3.4 by builder on 2018-11-16 03:16:48 UTC
FPC 2 ROM Juniper ROM Monitor Version 10.4b1
O/S Version 17.2R3.4 by builder on 2018-11-16 03:16:48 UTC

root>

*****Bring the FPC online

Note:the request chassis mic command is not supported on FPC slot 2 and MIC slot 0.

root> request chassis fpc slot 1 online
Online initiated, use "show chassis fpc" to verify

root> request chassis fpc slot 2 online
Online initiated, use "show chassis fpc" to verify

root> show system firmware
Part Type Tag Current Available Status
version version
FPC 1 ROM Monitor 0 0 10.0.39 OK
FPC 2 ROM Monitor 0 0 10.4.1 OK
Routing Engine 0 RE BIOS 0 1.1 OK

FPC after bootong process is complete check the new firmware upgraded.

root> show system firmware
Part Type Tag Current Available Status
version version
FPC 1 ROM Monitor 0 0 10.0.39 OK
FPC 2 ROM Monitor 0 0 10.4.1 OK
PIC 0 CMIC 2/0 EEPRO 0 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 1 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 2 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 3 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 4 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 5 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 6 2.53 2.53 OK
PIC 0 CMIC 2/0 EEPRO 7 2.53 2.53 OK
Routing Engine 0 RE BIOS 0 1.1 OK

root>

Notes:

Options
offline—Take the MIC offline.
online—Bring the MIC online.
fpc-slot slot-number—FPC slot number where the MIC is installed:
ACX4000 router—Replace fpc-slot with the value 0 or 1.

MX80 router—Replace fpc-slot with the value 1. This command is not supported on FPC slot 0.

MX104—Replace fpc-slot with the value from 0 through 2.

MX240 router—Replace fpc-slot with a value from 0 through 2.

MX480 router—Replace fpc-slot with a value from 0 through 5.

MX960 router—Replace fpc-slot with a value from 0 through 11.

MX2020 router—Replace fpc-slot with a value from 0 through 19.

MX2010 router—Replace fpc-slot with a value from 0 through 9.

MX2008 router—Replace fpc-slot with a value from 0 through 9.

mic-slot slot-number—MIC slot number. Replace slot-number with 0 or 1.